Introduction of metal furniture

The raw material of metal furniture factory is cold rolled steel plate. With the rise of the iron and steel industry of the "green revolution" and "zero energy" of the production process, from the selection of metal materials to the production process and after elimination, will not lead to the waste of resources to the society, and will not have influence on the ecological environment is friendly, reusable and sustainable development of resource products.

Metal furniture CDG furniture production prepared by cleaning phosphating process at ten stations, can effectively guarantee the fastness of the coating and the surface of the workpiece, using the coating materials of general powder coating of environmental protection and energy saving, high utilization rate, the working process of scattered powder can be recycled, and there is no formaldehyde exceed the standard problem.

Metal furniture purchase guide


1.wall thickness of metal furniture wall thickness in 1.2-2.5mm good, cheap goods may be 0.5-1.0mm thick metal tube; good table frame with 4mm thick high quality triangular board supported desktop, poor, with fine iron pipe welding boxes and legs connected on the line;


2.welding mouth: good commercial furniture factory structure all welding interface all polished smooth, and then go to electrostatic spraying, and cheap goods is impossible to spend that manual to burnish;


3.the product to pass through regular spraying degreasing, pickling, phosphating, rinsing, dust, powder spraying, drying, cooling, packaging and other processes to produce a good quality table frame.